Direct IO Pin Settings: 1-Wire

When adding a 1-wire device, a port and pin of a U4x1 device must be selected.  The pin is then reserved for the 1-Wire device and is not available for direct control.  If you try to change the properties of a pin that is reserved for a 1-Wire device, this warning message will appear.  The Item Name is the name of the pin, and the message contains the name of  1-Wire device that uses this pin.  

If you need to make this pin available for direct control, you will need to change the 1-Wire device to use a different pin, or delete the 1-Wire device.

Home Domination Home Page